Multifrequency Tag
RFID ON-METAL HARD TAG "RAPTORY"
Global Tag RAPTORY Tag is an on-metal industrial hard Tag, with IP68 class protection. It has two holes for a quick mounting. It is available in LF, HF, UHF and also NFC.
RAPTORY can be glued or screwed on all surface thanks to 3M adhesive ad Foam that helps to improve the adherence on irregular surfaces.
Different customization are available as color mold, UID or serial number engraving, memory encoding.
RUGGED
Born for indoor and outdoor heavy environment
on-METAL
Suitable for on-metal surface without performance loss
foam layer
Additional foam layer to improve the tag adherence
PRINTING
Printable and laserable surface with QRcode, serial and logo.
Specification
Physical Caracteristics
Mounting System: Rivet Holes (two holes) : ø 4mm (0,16 in) and Foam Adhesive (3M 467) for irregular surface
Weight: 7gr.
Material: High Quality ABS or Nylon (for case) – Foam with 3M 467 adhesive (for support layer)
Color: Generally white grey – Optionally any other colors are available
Class Protection: IP68 (Totally protected against ingress of solid / Protected against long period of immersion)
Weather Ability: Very Good, including UV resistance and sea water
Expected lifetime: Years in normal operating conditions
Delivery format: Individual
Types of RFID chips
LF: Available with TK4100, T5577. Other on request.
HF: Available with I-Code SLIX, I-Code SLIS, Mifare Ultralight, Mifare Classic 1K, Mifare Classic 4K, Mifare Plus X 4K, Mifare Desfire 4K, STM LRi2k, Ntag213, Ntag216, other on request
UHF: Available with NXP Ucode8 or Alien Higgs9 chip. Others on request.
user environment
Storage Temperature: -55°C (for 3h) to +100°C (for 2h) / -67°F (for 3h) to +230°F (for 2h) (for any other particular request contact us)
Operating Temperature: -25°C to +85°C / -13°F to +185°F
Chemical resistance:
No physical or performance changes in (tested up to, more hours can be):
– 200 hours Motor oil immersion
– 200 hours Salt water (salinity 10%) exposure
– 200 hours H2SO4 Sulfuric acid (10% pH 2) exposure
– 24 hours NaOH Caustic Soda (10%, PH 13) exposure
– 24 hours HCl Muriatic Acid (10%) exposure
– 24 hours Na2CO3 Soda Solvay
– 24 hours NH3 Ammoniac (5% to 25%)
Values in the table are the best recommendations; resistance against environmental conditions depends on the combinations of all influencing factors, exposure duration and
chemical concentrations. Thus, product’s final suitability for certain environmental conditions is recommended to be tested. We are available for other information.
Printing and custom options
Printing laser engraving: Serial UID, serial progressive number from database, randomize number from database text and Barcode or
QRCode. Other customization on required.
Silk Printing: 4-colors printing logo
Pre-Encoding: Customer specific encoding of EPC or User Memory (also from Database). Locking permanently or with password. Insert into
Database TID code.
On Dual Frequency type, insert in EPC UHF serial UID of LF or HF inlay
installation mode
With 3M 467MP Adhesive model: when mounting the tag with adhesive background, clean and dry the surface for obtaining maximum
bond strength.
For more information about adhesive check at this link: http://multimedia.3m.com/mws/media/104064O/high-performance-adhesive
transfer-tapes-with-3m-adhesive-200mp.pdf
With Screws: Size M4.
With Pop Rivet: Size 4mm. We have available rivet and also optional Manual pistol rivet.
WE HAVE ALSO
RAPTORY XL VERSION
Designed for a special customer is now available as standard product. With XL size RAPTORY XL is more visible and with more performance than RAPTORY.
Fill in the form below to receive more information about this product, to receive quotes for quantities or for samples. We will contact you as soon as possible to help you choose the most suitable RFID tag for your project.
