LF, HF ISO15693, HF ISO14443, NFC
RFID TOKEN "Tokky34"
Global Tag ON-METAL TOKKY 34 is a round RFID hard tag, suitable for both metal and no metal surfaces. This IP68 transponder can be mounted in indoor and outdoor environments.
ON-METAL TOKKY 34 has a 34mm diameter and a 5mm internal hole: it can be mounted on every surface through screws, rivets or with the backside 3M glue.
For the most industrial uses, the optional resin injection makes the tag highly strong and resistant.
RUGGED
Born for indoor and outdoor heavy environment
on-METAL
Suitable for on-metal surface without performance loss
foam layer
Additional foam layer to improve the tag adherence
PRINTING
Printable and laserable surface with QRcode, serial and logo.
Specification
Physical Caracteristics
Mounting System: Rivet Holes (two holes) : ø 5mm (0,20 in) and adhesive Foam (3M 467) for irregular surface
Weight: 15gr.
Material: High Quality ABS or Nylon (for case) – Foam with 3M 467 adhesive (for support layer)
Color: Generally white grey – Optionally any other colors are available
Class Protection: IP68 (Totally protected against ingress of solid / Protected against long period of immersion)
Weather Ability: Very Good, including UV resistance and sea water
Expected lifetime: Years in normal operating conditions
Delivery format: Individual
Types of RFID chips
LF: Available with TK4100, T5577. Other on request.
HF: Available with I-Code SLIX, I-Code SLIS, Mifare Ultralight, Mifare Classic 1K, Mifare Classic 4K, Mifare Plus X 4K, Mifare Desfire 4K, STM LRi2k, Ntag213, Ntag216, other on request.
user environment
Storage Temperature: -55°C (for 3h) to +120°C (for 2h in the oven) / -67°F (for 3h) to +248°F (for 2h in the oven) (for any other particular request or various environment, contact us)
Operating Temperature: -25°C to +85°C / -13°F to +185°F
Chemical resistance:
No physical or performance changes in (tested up to, more hours can be):
– 200 hours Motor oil immersion
– 200 hours Salt water (salinity 10%) exposure
– 200 hours H2SO4 Sulfuric acid (10% pH 2) exposure
– 24 hours NaOH Caustic Soda (10%, PH 13) exposure
– 24 hours HCl Muriatic Acid (10%) exposure
– 24 hours Na2CO3 Soda Solvay
– 24 hours NH3 Ammoniac (5% to 25%)
Values in the table are the best recommendations; resistance against environmental conditions depends on the combinations of all influencing factors, exposure duration and
chemical concentrations. Thus, product’s final suitability for certain environmental conditions is recommended to be tested. We are available for other information.
Printing and custom options
Printing laser engraving: Serial UID, serial progressive number from database, randomize number from database text and Barcode or
QRCode. Other customization on required.
Silk Printing: 4-colors printing logo
Pre-Encoding: Customer specific encoding LF or HF (ISO15693 or ISO14443) user memory. For NFC chip encoding memory with different
type of NFC (E-mail, URI etc.)
Resin: This option helps to make the tag stronger and the antenna more stable.
installation mode
3M 467MP Adhesive: when mounting the tag with backside adhesive, clean and dry the surface in order to get the maximum bond strength.
For more information about adhesive check this link: 3M adhesive.
2mm Foam: to improve the adherence when the tag is mounted on irregular surfaces
Screws: Size M5.
Pop Rivet: Size 5mm.
Fill in the form below to receive more information about this product, to receive quotes for quantities or for samples. We will contact you as soon as possible to help you choose the most suitable RFID tag for your project.
