low price
Thanks to big quantities production price is very low
Different inlay
Can choose from many different antenna inlay. Ask for more.
custom size
Available many different sizes also custom
PRINTING
Printable surface with QRcode, serial and logo.
Smart Labels can be produced in HF 13.56Mhz frequency (ISO14443 or ISO15693), UHF 860-960Mhz, or in double frequency for special applications.
The HF 13.56 MHz band is considered the universal band and it is used worldwide for applications such as access control, identification, payment, baggage control, laundry and library management, etc..
The latest generations of chips for this type of TAG support the anti-collision function that allows the reading/writing of multiple tags simultaneously present in the field of the Reader.
Unlike in the UHF band, the 13.56 MHz RF field is not particularly affected by water or human body tissues.
HF RFID tags operate at 13.56 MHz and it can be ISO/IEC 14443 or ISO/IEC 15693.
The ISO/IEC 14443 standard is defined as “proximity” and covers reading distances of up to 12cm; this standard is that of NFC technology implemented in most smartphones and tablets.
The ISO/IEC 15693 standard is defined as “vicinity” and covers reading distances up to a maximum of 130cm.
![labely_3657_1](https://global-tag.com/wp-content/uploads/2024/03/labely_3657_1-scaled.webp)
![Immagine protetta da Copyright](https://global-tag.com/wp-content/uploads/2024/06/labely_8550_1_big.jpg)
The UHF RFID band is the most recently introduced and it is the preferred band in logistic and asset management areas. The reading distance is significantly greater than HF tags one, with a reading range of up to 12-15 meters but, in exceptional cases, touching even 30 meters.
The reading distance of a UHF RFID tag is heavily influenced by the transmission power of the reader, the size of the tag’s antenna and the characteristics of the environment. Metal and liquids, in fact, attenuate the signal thus reducing the communication range.
The tag-controller coupling occurs by electromagnetic means, in HF tags mainly by magnetic field, while in UHF tags the prevailing component is of electric type.
The reference standard is ISO/IEC18000-6 Type C and the communication protocol between tags and controllers is called ‘EPC “Class1/Generation2”. The anti-collision system is even more optimized, allowing multiple readings, which exceed 100 tags per second.
HF ISO15693 & ISO14443 Inlay
HF 1515 inlay
![15x15mm_big](https://global-tag.com/wp-content/uploads/2024/06/15x15mm_big.jpg)
HF circular inlay
![23mm_25_30mm_big](https://global-tag.com/wp-content/uploads/2024/06/23mm_25_30mm_big.jpg)
HF 2136 inlay
![24x39mm_big](https://global-tag.com/wp-content/uploads/2024/06/24x39mm_big.jpg)
HF 1552 inlay
![18x56mm_big](https://global-tag.com/wp-content/uploads/2024/06/18x56mm_big.jpg)
HF 4545 inlay
![45x45mm_50x50mm_big](https://global-tag.com/wp-content/uploads/2024/06/45x45mm_50x50mm_big.jpg)
HF 4576 inlay
![45x76mm_54x86mm_big](https://global-tag.com/wp-content/uploads/2024/06/45x76mm_54x86mm_big.jpg)
UHF ISO18000-6c EPC C1G2 inlay
UHF 12 inlay
![UHF12](https://global-tag.com/wp-content/uploads/2024/07/UHF12.jpg)
UHF 27 inlay
![UHF27](https://global-tag.com/wp-content/uploads/2024/07/UHF27.jpg)
UHF 2710 inlay
![UHF2710](https://global-tag.com/wp-content/uploads/2024/07/UHF2710.jpg)
UHF 4015 inlay
![UHF4015](https://global-tag.com/wp-content/uploads/2024/07/UHF4015.jpg)
UHF 4630 inlay
![UHF4630_Gstar](https://global-tag.com/wp-content/uploads/2024/07/UHF4630_Gstar-1.jpg)
HF 4576 inlay
![UHF5030](https://global-tag.com/wp-content/uploads/2024/07/UHF5030.jpg)
UHF 7012 inlay
![UHF7012](https://global-tag.com/wp-content/uploads/2024/07/UHF7012.jpg)
UHF 9319 inlay
![UHF7017_short](https://global-tag.com/wp-content/uploads/2024/07/UHF7017_short.jpg)
HF 4576 inlay
![UHF9319_G](https://global-tag.com/wp-content/uploads/2024/07/UHF9319_G.jpg)
UHF 9508 inlay
![UHF958_Squiggle](https://global-tag.com/wp-content/uploads/2024/07/UHF958_Squiggle.png)
available types
Each antenna design can be expressed into 4 products, which differ in workmanship, physical features and cost. Depending on the project requirements, it is possible to opt for dry inlay, wet inlay, coated paper label or plastic label.
Dry Inlay
The inlay is the basic component of an RFID label: it is the special substrate on which the antenna, the chip and the capacitor are placed. It does not have any die-cutting, adhesive or cover (plastic or paper). Due to the absence of additional processing, it is the most inexpensive product.
Wet Inlay
The wet-inlay is the next step: it has die-cutting, adhesive and a transparent polypropylene cover. This product, which has a visible antenna, can already be considered an RFID label in its own right. The main limit is the impossibility of printing the surface.
Coated paper labels
This product differs from wet-inlay in that it has a paper surface, which allows it to be printed on printers with an integrated RFID module. The paper RFID label is supplied in rolls and, on request, can be coded and/or printed by us during production.
Plastic surface label
To ensure better resistance to atmospheric agents and to increase the useful life of the product, it is advisable, where necessary, to opt for the Smart Label with one of the proposed plastic surfaces. Depending on the requirements, the materials used for the covering are PP, PET and PVC.
AVAILABLE label sizes
here you can find a selection of main label sizes.
15mm, 18mm, 21mm, 23mm, 25mm, 15x30mm, 15x73mm, 20x80mm, 25x75mm, 26x44mm, 30x15mm, 45x20mm, 50×50, 54x34mm, 54x86mm, 75x25mm, 80x80mm, 80x100mm, 80x110mm, 95x21mm, 98x10mm, 100x20mm, 100x50mm, 100x80mm, 100x100mm, 100x110mm, 100x150mm, 100x190mm
Specification
Physical Caracteristics
Mounting System: Bending
Weight: 1,1gr.
Material: PET/PP
Color: Generally white – Optionally any other colors are available
Class Protection: IP65 (Limited protection against dust ingress. (no harmful deposit), / Protection from splashed water.
Weather Ability: Very Good
Expected lifetime: Some Years in normal operating conditions
Delivery format: Individual format, in fanfold or in reel
Types of RFID chips
HF: I-Code SLIX, Mifare Ultralight, Mifare Classic 1K, Ntag213, Ntag216, others on-request
UHF: Available with NXP Ucode8 or Alien Higgs9 chip. Others on request.
user environment
Storage Temperature: -25°C to 85°C / -13°F to +185°F
Operating Temperature: -10°C to +50°C / 14°F to 122°F
![](https://global-tag.com/wp-content/uploads/2024/03/Dual-Labely_2_big-jpg.webp)
![](https://global-tag.com/wp-content/uploads/2024/06/inventario_RFID_big.jpg)
![](https://global-tag.com/wp-content/uploads/2024/06/DSC_0160-scaled.jpg)
![](https://global-tag.com/wp-content/uploads/2024/06/Etichetta_UHF_printing.jpg)
Printing and custom options
Silk Printing: Serial UID, serial progressive number from database, randomize number from database text and Barcode or QRCode. Other
customization on request. 4-colors printing logo.
Pre-Encoding: Customer specific encoding of EPC or User Memory (also from Database). Locking permanently or with password. Insert into
Database TID code. On NTag21x chip (NFC) encoding memory (mailto, URI or other information) from database.
hardware solution
Given the customer requirement to print by himself this type of HF or UHF label in loco before apply on asset, we have looked for, found and tested (then certified) some printers to print and encode all the information you need.
Chainway C30 Printer with RFID UHF Module
To meet the customer’s request we have developed a software, which is ready to handle the printing layout (QRcode, Barcode, serial number, logo) and the tag memory encoding.
Toshiba B-EX4T Printer with RFID HF Module
To meet the customer’s request we have developed a software, which is ready to handle the printing layout (QRcode, Barcode, serial number, logo) and the tag memory encoding.
Case History
Fill in the form below to receive more information about this product, to receive quotes for quantities or for samples. We will contact you as soon as possible to help you choose the most suitable RFID tag for your project.